Achieve maximum performance from your stereo components with our flagship speaker system.Only live sounds better.
Highlights:
PANDA® AUDIO KV-707-AB Integrated Stereo Amplifier delivers authentic sound re-production with low distortion and high efficiency, by employing latest discrete amplifier circuit technology. The Excellent sonic performance is a result of two separate amplifier modules with fast recovery rectifiers and large smoothing capacitors along with high current torroidal transformer , coupled to a low noise pre-amplifier with baxandall tone controls. High Current Full Complementary Bi-Polar Junction transistor configured in class AB at the output stage excels in driving low impedance and complex speaker systems with great dynamics and good efficiency. Mix signal Input provided, with variable gain control is used in conjunction with the microphone input for Sing along in Home Audio and for announcement in commercial installation.
Line Out signal provided can be used to connect Active Sub-woofer in Home Theatre applications or to cascade amplifiers in commercial installations. An optimum Balance of Price , sonic performance and features makes PANDA® AUDIO KV-707-AB an excellent choice among Integrated Stereo Amplifier.
| BLUE TOOTH CONNECTION | Yes, Blue Tooth Connection Device provided with the set |
| OUTOUT POWER (per channel) | 8 ohms 20 Hz to 20kHz 0.1% THD,30 watts RMS 4 OHMS 1kHz,0.1% THD,50 watts RMS |
| DISTORTION | SMPTE-IM, less than 0.05% THD less than 0.1% at rated Power (22Hz-20kHz) |
| Frequency Response | 22 Hz to 20kHz,+0/-1 dB,1 watt |
| Damping Factor | Greater than 150 |
| NOISE | 100 dB below rated output (A weighted) |
| SENSITIVITY | 140 mV (for rated power at 4 ohms) CD, DVD, AUX Input ,Volume Control at Max |
| VOLTAGE GAIN | 39 dB (CD,DVD,AUX Input,Volume at Max |
| INPUT IMPEDENCE | 20 K ohms unbalanced |
| Amplifier Protection | Full Short Circuit, open circuit, ultrasonic, and RF Protection |
| LOAD PROTECTION | On/off muting and DC – fault protection |
| TOPOLOGY | 2 Channel Power Amplifier with Integrated Tone Control, balance and input selector |
| OUTPUT CIRCUIT TYPE | Complimentary linear outputs |
| CONTROLS | Logic Controlled selector for inputs. Rotary Controls for Bass,Balance,treble & Volume |
| TONE CONTROLS | Active Baxandall type +/- 12 Db Cut & Boost |
| INPUTS | CD, DVD, & AUXILIARY ( STEREO) Mike (Mono Distributed equally to both channels) MIX SIGNAL ( Stereo distributed & mixed equally |
| DIMENSIONS | H x W x D: 82 x 425 x 360 mm |
| WEIGHT | 6.5 Kg net , 8.5 Kg shipping |
| Recommended Use | Main/ Effect Channel |
| Low Frequency | 20 cm Woofer, Butyl Rubber Surround |
| High Frequency | 1 inch Dome Tweeter |
| Speaker Terminal | Yes |
| Input Power (Max/RMS) | 120 / 20 Watts |
| Frequency Range | 25 Hz to 20 K Hz |
| Sensitivity | 90 dB |
| Impedence | 8 ohms |
| Dimensions ( W x H x D) | 225 x360 x210 mm |
| Weight | 4 Kg / Unit |
| Enclosure Design | Front Ported Bass Reflex |